[. . . ] Remove the PC cover (for further information, consult your PC manual). Before removing the card from its plastic bag, touch the metallic back plate of your PC with your hand to discharge any static electricity from your body. [. . . ] Audio connection: connect your external peripheral to the AUDIO-IN input using a mini-jack format audio cable (not included). : you may have to purchase adapters to connect your external peripheral to your Smart TV. Because the configuration of the card is Plug and Play, Windows will automatically detect its presence. : your installation screens and procedure may vary slightly from those described in this manual. Because drivers are constantly being developed, the driver provided on your CD-ROM may not be the most recent version. Com) to verify this and, if necessary, download the very latest version. Windows 98 SE will successively detect the 3 devices that make up your Smart TV board. Windows will display an Add New Hardware Wizard dialog box informing you that the system has found a new device. - Type in D:\Drivers (or replace D with the drive letter used on your computer). (Windows may ask you to insert the Windows 98 SE CD-ROM to complete the installation procedure. Windows Millennium will successively detect the 3 devices that make up your Smart TV board. Windows will display an Add New Hardware Wizard dialog box informing you that the system has found a new device. [. . . ] Windows will display a Found New Hardware Wizard dialog box informing you that the system has found a new device. The wizard will suggest that you Install the software automatically (Recommended). [. . . ]